Dedicated Oil Filtration Systems

COMO’s C-165 and C-265 dedicated bypass filtration systems are designed for individual oil reservoir applications. They provide a quick payback by reducing waste oil disposal costs, decreasing component wear, and practically eliminating downtime.

Do You Experience These Problems?

• Contaminates in Oil
• Moisture in Oil
• System Failure & Service Outages
• High Replacement & Disposal Costs

Most fluid filtration systems use standard in-line full-flow 20-50 micron filters to control particulate contamination that can cause catastrophic failure. However, particles measuring 3 micron and less contribute significantly to abrasive wear especially in dynamic clearances such as, close tolerance servo valves. COMO’s off-line, dedicated, depth type filters can control contamination in the 1-5 micron range and remove moisture to reduce wear in critical or sensitive components.

C-165 and C-265 Standard Features Include:

• 1, 3 or 5 GPM Gear Pump (Fluid Flow Determined By Fluid Viscosity)
• Inlet Wye Strainer
• Pressure Relief Valve
• 14 Gauge Steel Housing
• Stainless Steel Element Lifter
• Motor Rated On/Off Switch
• 115 VAC 60HZ TEFC 1725 RPM Motor
• 0-100 PSI Pressure Gauge W/Vent Valve
• Freestanding Frame
• Continuously Filter Fluid in Reservoir

Other Options Available:

• Motor in any Voltage or Phase
• Additional Pump (Centrifugal or Air Diaphragm)
• Stainless Steel, Chrome Plated, Black Powder Coat or Electro-Polished Finish

 

 

Give us a call. 800.453.8639